1. Air Compressor
ZC-QC001D
- Rated power: Max 2.5 kW , 3Hp and 230v motor
b. Twin cylinder belt slow running pump.
c. Tank capacity : 100 litre
d. Start method : 13A
e. Wheel : 4 Drive Belt
f. Tank material : Steel
g. Pressor: 8bar
h. Pump (RPM ): 1000
i. Motor speed (RPM ) : 2100
j. Air displacement : 300liter per minute
k. Included twin pressure gauges ,cut out switch .safety valve and pressure regulator.
l. Productivity: 200 l/min
m. Compete with all standard Accessories
n. Brand & Model: To be mentioned by the bidder
o. d. Manufacturer’s Authorization Letter with ISO Certificate and Catalogs should be submitted.
Warranty: 1 (One) year with services
2.Automotive Scanner
ZC-QC002D
Features
■ Hardware upgrade, Android 10. operating system, 4GB memory and 64GB storage, 10.1-inch sunlight-readable gorilla screen, strong battery life
■ SmartLink V2.0 diagnostic box supports SmartLink remote diagnosis, and the Wi-Fi signal is significantly enhanced, with better heat dissipation and more stable connection.
■ Supports mainstream protocols such as CAN2.0/CAN FD/DolP, and also supports J2534/D-PDU/RP1210 diagnostic communication standards
■ Local diagnosis supports advanced functions such as coding, matching, and flashing, and supports the guidance function of Volkswagen, Audi and other car series, and online programming functions can be purchased freely.
■ Supports ADAS calibration, anti-theft matching, tire pressure diagnosis, endoscope, battery detection, oscilloscope, multimeter, sensor and other function expansions
Host parameters
Processor: 4 core 2.0 GHz
Operating system: Android 10.0
Memory: 4GB
Storage: 64GB
Battery: 6300mAh, 7.6V
Display: 10.1 inches
Resolution:1280×800
Camera: Houmeng 8 million pixels
Wi-Fi: 2.4GHz/5GHz (dual-band supports 4G)
Bluetooth: BT 5.1 and backward compatible
Working temperature: 0~50C
Size: 274×190.5×40.5(mm)
Diagnostic box parameters
Display: 3.97-inch TFT screen
Resolution: 320×480
Memory: 256M
Storage: 8GB
Working voltage: DC9~36V
Power consumption: <6W
Local diagnostic mode: Bluetooth/USB wired
Remote diagnostic mode: Ethernet
Working temperature: -10-50°C
Size: 200x110x 47(mm)
3.air conditioning system training platform
ZC-QCD28A
【Product profile】
The automatic air-conditioning training platform is based on the original automobile automatic air-conditioning system of Toyota Corolla and fully demonstrates the structure and working process of the automobile automatic air-conditioning system.
It is suitable for the teaching needs of secondary and higher vocational and technical colleges, general education colleges and training institutions for theoretical and maintenance training of automobile automatic air conditioning systems.
【Functional characteristics】
1. A real and operational automobile automatic air conditioning system, fully demonstrating the composition and working process of the automobile automatic air conditioning system.
2. The three-phase motor is used as the power source to drive the air conditioning compressor to work. Operating the air conditioning control panel can truly demonstrate the working process and working principle of the car’s automatic air conditioning system.
3. The training table panel is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer using a special process; the UV flatbed inkjet panel is printed with color circuit diagrams and circuit diagrams that will never fade. Working principle diagram; students can visually compare the circuit diagram and the actual object to understand and analyze the working principle of the automobile automatic air conditioning system.
4. There are detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of various circuit components of the air conditioning system on the panel, such as resistance, voltage, current, frequency signals, etc.
5. There are pressure gauges and temperature gauges installed on the training platform panel, which can display the parameter changes of air conditioning pipeline pressure and air inlet and outlet temperature in real time.
6. The training platform provides a platform for students to practice refrigerant filling, leak detection and other practical operations.
7. There is a 20cm steel table on the base directly in front of the equipment testing panel, which is convenient for placing data, testing instruments, etc.
8. The base of the training platform is welded with a steel structure, and the round hand guard poles are welded in front/on both sides. The surface is spray-coated and equipped with a self-locking caster device, which makes it flexible to move, safe, reliable, sturdy and durable.
【Technical specifications】
Dimensions: 1500×1000×1700mm (length×width×height)
Power supply: three-phase four-wire (or three-phase five-wire) 380V±10% 50Hz
external power supply: AC 220V±10% 50Hz
working voltage: DC 12V
refrigerant: R134a
Working temperature: -40℃～+50℃
High pressure pressure gauge: 0～3.5MPa
Low pressure pressure gauge: 0～1.5MPa
Three-phase asynchronous motor:
Voltage: AC 220V/380V
Power: 2.2KW
Speed: 1420r /min
steel pipe: 6 0*40*3mm
panel cabinet: 1.5mm cold plate stamping;
mobile casters: 120*80mm
4. Petrol Engine Cutaway Model
ZC-QCA10A
【Product profile】
This equipment uses the Toyota Corolla 1ZR electronically controlled gasoline engine assembly for cross-section processing. The components are complete and the cross-section position is reasonable. It can fully display the internal and external structure and movement of the components of the gasoline engine. It is suitable for the principles and mechanical mechanisms of gasoline engines. of teaching.
【Functional characteristics】
1. The original gasoline engine assembly is used for mechanical cut-out, fully displaying the internal and external structure of the gasoline engine mechanism.
2. Spray the mechanical sections of the engine with different colors of paint.
3. The single-phase gear reduction motor with adjustable speed drives the engine crankshaft to run at low speed, truly demonstrating the movement process of the internal mechanical components of the gasoline engine.
4. The mobile platform is made of high-strength steel structure welded, and the surface is spray-coated. The bottom of the mobile stand is equipped with a self-locking caster device, which is removable and convenient for teaching.
5. Anatomical parts:
cylinder block (piston and crankshaft can be observed outside of operation);
valve cover (camshaft can be observed outside operation);
cylinder head (intake and exhaust valves can be observed outside operation);
intake and exhaust manifolds and filters generator;
generator and water pump;
timing mechanism (timing mechanism can be observed outside operation);
【Technical specifications】
Dimensions: 800×600×1200mm (length×width×height)
Power supply: 220V±10% 50Hz
single-phase gear Geared motor:
Rated voltage: AC 220V 50Hz
Rated power: 250W
Rated speed: 0-15 rpm
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Mobile casters: 100*50mm
【Basic configuration (for each unit)】
| serial number | name | Specifications and models | unit | quantity |
| 1 | Gasoline engine assembly | Renovation | set | 1 |
| 2 | Single phase gear reduction motor | 220V 250W | tower | 1 |
| 3 | Leakage protection switch | indivual | 1 | |
| 4 | Mobile stand (with self-locking casters) | 800×600×470mm (length×width×height) | tower | 1 |
5.Auto Gear Model
ZC-QCB40A
【Functional characteristics】
1. The manual transmission assembly (complete with accessories) is used for dissection. All parts are complete, which can comprehensively display the internal structure of the transmission and the entire process of shifting power transmission.
2. Through clever anatomy and spraying different colors on each section, the internal mechanical structure of the transmission and the assembly relationship between each other are clearly displayed on the outside.
3. The flip frame is welded with high-strength steel structure, and the surface is spray-coated. The cabinet bottom formed by cold plate stamping is equipped with self-locking casters, which is removable and convenient for teaching.
【Basic configuration (for each unit)】
| serial number | name | Specifications and models | unit | quantity |
| 1 | Anatomy of manual transmission assembly | set | 1 | |
| 2 | Single phase gear reduction motor | 220V 250W | tower | 1 |
| 3 | Leakage protection switch | indivual | 1 | |
| 4 | Mobile stand (with self-locking casters) | 800×600×470mm (length×width×height) | tower | 1 |
| 5 | clutch assembly | set | 1 | |
| 6 | Gear handle | set | 1 |
6.Diesel Engine Cutaway Model Motor Operated
ZC-QCA13D
【Product profile】
This equipment uses the Great Wall 2.0T electronically controlled diesel engine assembly (easy to disassemble and assemble), which consists of a disassembly and assembly flip bench and an operation detection console. The disassembly and flipping bench provides trainees with practical training on engine disassembly and assembly. After the engine is assembled, it can be connected to the operation detection console to start and run the engine and detect the assembly effect of the engine.
【Functional characteristics】
1. There is a color printed circuit diagram on the panel of the training platform. Students can visually compare the circuit diagram with the actual electronically controlled diesel engine to understand and analyze the working principle of the control system;
2. The training platform consists of a disassembly and assembly flipping platform and The run detection console consists of two parts.
The disassembly and flipping platform consists of an electronically controlled diesel engine assembly and an engine disassembly and assembly rack that can be flipped 360 degrees. The operation detection console consists of a control panel, engine electronic control unit, cooling system, fuel supply system, battery, etc.;
3 .The disassembly and assembly turning stand with reducer can be turned and stationary at any angle in the axial direction, and can be easily used for disassembly and assembly training. An oil pan is placed at the bottom to facilitate the collection of small parts, water and oil. Three, do not fall to the ground; the operation detection console rack is equipped with all the components and elements for starting and running the engine, such as electronic control unit, water tank, fuel tank and oil pump, instruments, ignition switch, etc., and is used with the disassembly and assembly flip bench to conduct oil, circuit, water, and The docking of the air circuit can run the engine (acceleration/deceleration/idling conditions are normal) and test the effect of engine assembly;
4. There is a color UV flatbed printed circuit diagram on the training platform panel, and students can visually compare the circuit diagram with the actual engine to understand and analyze the working principle of the control system;
5. The panel is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer through a special process; the panel is printed with colors that will never fade. System circuit diagram, the training bench panel is equipped with detection terminals, which can directly detect the electrical signals of each sensor, actuator, and engine control unit pin on the panel, such as resistance, voltage, current, frequency signal, etc.; on the
training bench panel It is equipped with automotive instruments, fuel pressure gauges, and vacuum pressure gauges, which can display changes in parameters such as engine speed, fuel injection pressure, and intake manifold pressure in real time;
6. The training platform is equipped with a diagnostic socket that can be connected to a dedicated or universal car decoder. It can perform self-diagnostic functions such as reading fault codes, clearing fault codes, and reading data streams for the engine electronic control system.
7. The training platform is equipped with installation protection devices such as a main power switch and a flywheel protective cover.
8. The base of the training platform is welded with a steel structure, and the surface is spray-coated. It is equipped with self-locking casters, making it flexible to move, safe, reliable, sturdy and durable.
【Technical specifications】
Working power supply: DC 12V
Fuel label: According to engine model
Fuel tank volume: 10L
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Panel cabinet: 1.5mm cold plate stamping, with maintenance door set on the back ;
Mobile casters: 120*80mm
Mobile stand (with self-locking caster device, panel cabinet and base): 1000*700*1750mm (length*width*height)
Disassembly and assembly flip frame (with self-locking caster device): about 1300× 600×800mm (length×width×height)
【Basic configuration (for each unit)】
| serial number | name | Specifications and models | unit | quantity | ||
| (1) 1 set of operation detection console | ||||||
| 1 | Test control panel | Equipped with various detection terminals and color circuit diagram (950*900*4mm aluminum-plastic plate) | set | 1 | ||
| 2 | Engine control computer (ECU) | Original car | set | 1 | ||
| 3 | instrument cluster | Original car | set | 1 | ||
| 4 | Diagnostic seat | Original car | indivual | 1 | ||
| 5 | Ignition Switch | Original car | indivual | 1 | ||
| 6 | Fuel tank | 10L | indivual | 1 | ||
| 7 | Fuel pump (including fuel pump plug) | brand new | set | 1 | ||
| 8 | Water tank and accessories | Original car | set | 1 | ||
| 9 | cooling electronic fan | 12V, 80W | indivual | 2 | ||
| 11 | battery | 12V65Ah | tower | 1 | ||
| 11 | relay | Including: starting relay, oil pump relay, cooling fan relay, etc. | set | 1 | ||
| 12 | Butt harness | set | 1 | |||
| 13 | Fuse box | Relay box (with fuse holder) integral type | indivual | 1 | ||
| 14 | main power switch | 50A | indivual | 1 | ||
| 15 | Mobile stand (with self-locking casters, panel cabinet and base) | 1000*700*1750mm (length*width*height) | tower | 1 | ||
| 16 | Fault simulation and troubleshooting device | set | 1 | |||
| (2) 1 set of disassembly and assembly flip stand | ||||||
| 1 | Engine assembly | Original car | set | 1 | ||
| 2 | Intake and exhaust pipes | Original car | set | 1 | ||
| 3 | three way catalytic converter | With new muffler | set | 1 | ||
| 4 | Butt harness | set | 1 | |||
| 5 | Large area oil basin | About 700×650×30mm (length×width×depth) | indivual | 1 | ||
| 6 | Disassembly and assembly of flip stand (with self-locking caster device) | Approximately 1300×600×800mm (length×width×height), with reducer, capable of flipping and stationary at any angle in the axial direction. | set | 1 | ||
7.EFI Engine Cutaway Model Motor Operated
ZC-EFI01A
【Product profile】
The Toyota Corolla 1ZR engine disassembly and operation training platform is composed of two parts: an electronically controlled gasoline engine assembly (easy to disassemble) and a disassembly and assembly flip stand and an operation detection console. The disassembly and flipping bench provides trainees with practical training on engine disassembly and assembly. After the engine is assembled, it can be connected to the operation detection console to start and run the engine and detect the assembly effect of the engine.
【Functional characteristics】
1. There is a color inkjet circuit diagram painted on the panel of the training platform. Students can visually compare the circuit diagram with the actual electronically controlled gasoline engine to understand and analyze the working principle of the control system;
2. The training platform consists of disassembly, assembly, flipping and operation testing. The console consists of two parts.
The disassembly and flipping bench consists of an electronically controlled gasoline engine assembly and an engine disassembly and assembly rack that can be flipped 360 degrees. The operation detection console consists of a control panel, engine electronic control unit, cooling system, fuel supply system, battery, etc.;
3 .The disassembly and assembly turning stand with reducer can be turned and stationary at any angle in the axial direction, and can be easily used for disassembly and assembly training. An oil pan is placed at the bottom to facilitate the collection of small parts, water and oil. Three, do not fall to the ground;
the operation detection console rack is equipped with all the components and elements for starting and running the engine, such as electronic control unit, water tank, fuel tank and oil pump, instruments, ignition switch, etc., and is used with the disassembly and assembly flip bench to conduct oil, circuit, water, and The docking of the air circuit can run the engine (acceleration/deceleration/idling conditions are normal) and test the effect of engine assembly;
4. There is a color UV flatbed printed circuit diagram on the training platform panel, and students can visually compare the circuit diagram with the actual engine to understand and analyze the working principle of the control system;
5. The panel is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer through a special process; the panel is printed with colors that will never fade. System circuit diagram, the training bench panel is equipped with detection terminals, which can directly detect the electrical signals of each sensor, actuator, and engine control unit pin on the panel, such as resistance, voltage, current, frequency signal, etc.; on the
training bench panel It is equipped with automotive instruments, fuel pressure gauges, and vacuum pressure gauges, which can display changes in parameters such as engine speed, fuel injection pressure, and intake manifold pressure in real time;
6. The training platform is equipped with a diagnostic socket that can be connected to a dedicated or universal car decoder. It can perform self-diagnostic functions such as reading fault codes, clearing fault codes, and reading data streams for the engine electronic control system.
7. The training platform is equipped with installation protection devices such as a main power switch and a flywheel protective cover.
8. The base of the training platform is welded with a steel structure, and the surface is spray-coated. It is equipped with self-locking casters, making it flexible to move, safe, reliable, sturdy and durable.
【Technical specifications】
Working power supply: DC 12V
Fuel label: According to engine model
Fuel tank volume: 10L
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Panel cabinet: 1.5mm cold plate stamping, with maintenance door on the back;
mobile Casters: 120*80mm
Appearance: 1500*1000*1700mm (length*width*height)
【Basic configuration (for each unit)】
| serial number | name | Specifications and models | unit | quantity |
| (1) 1 set of operation detection console | ||||
| 1 | Test control panel | Equipped with various detection terminals and color circuit diagram (950*900*4mm aluminum-plastic plate) | set | 1 |
| 2 | Engine control computer (ECU) | Original car | set | 1 |
| 3 | instrument cluster | Original car | set | 1 |
| 4 | Diagnostic seat | Original car | indivual | 1 |
| 5 | Ignition switch assembly | Original car | indivual | 1 |
| 6 | fuel pressure gauge | 0-10kg/ cm2 | indivual | 1 |
| 7 | Vacuum pressure gauge | 0-76in.Hg | indivual | 1 |
| 8 | Fuel tank | 10L | indivual | 1 |
| 9 | Gasoline pump (including gasoline pump plug) | brand new | set | 1 |
| 10 | Water tank and accessories | Original car | set | 1 |
| 11 | cooling electronic fan | 12V, 80W | indivual | 2 |
| 12 | battery | 12V 65Ah | tower | 1 |
| 13 | relay | Including: starting relay, oil pump relay, cooling fan relay, etc. | set | 1 |
| 14 | Butt harness | set | 1 | |
| 15 | Fuse box | indivual | 1 | |
| 16 | main power switch | 50A | indivual | 1 |
| 17 | Mobile stand (with self-locking casters, panel cabinet and base) | 1000*700*1750mm (length*width*height) | tower | 1 |
| 18 | Fault simulation and troubleshooting device | set | 1 | |
| (2) 1 set of disassembly and assembly flip stand | ||||
| 1 | Electronically controlled gasoline engine assembly | Original car | set | 1 |
| 2 | Intake and exhaust pipes | Original car | set | 1 |
| 3 | three way catalytic converter | With new muffler | set | 1 |
| 4 | Butt harness | set | 1 | |
| 5 | Large area oil basin | About 700×650×30mm (length×width×depth) | indivual | 1 |
| 6 | Disassembly and assembly of flip stand (with self-locking caster device) | Approximately 1300×600×800mm (length×width×height), with reducer, capable of flipping and stationary at any angle in the axial direction. | set | 1 |
8.Engine Analyzer
ZC-QC003D
A. Input voltage AC: 220V-
240V frequency: 50/60HZc. Charging/Output Voltage: 12Vd minimum. Rated current: 2.5A-6Ae. Reference capacity (Ah): 40-90f. Insulation level: Hg. Comprehensive protection against overcharge, short circuit and reverse polarity.
H. LED detector for full charge and power on. Mention the manufacturer part number. j. Comes with standard accessories k. Charges all acid batteries (wet cells, MF, AGM and cel)
. Required documents: catalog/manual, ISO and CE or European standards certificates, manufacturer’s authorization letter and contact details. Brand and model: as stated by the bidder
Country of Origin and Manufacturing: Mentioned by Bidder
Warranty: 1 (one) year, including service. Installation, testing and commissioning shall be carried out by the bidder’s engineers
12.Timing Light
ZC-QC005D
a. Checking Ignition Timing on Automotive
b. Type: Ignition Timing Light Digital
c. Input voltage: 12V
d. Working temperature: 0-40⁰C
e. Material: Plastic
f. Warranty: 1 (One) year with services
g. Brand & Model: To be mentioned by the bidder
h. Country of Origin & Manufacturing: To be mentioned by the bidder
i. Warranty: 1 (One) year with services
Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
13.Tyre Changer with all Accessories
ZC-QC006D
Motor power: 1.1/0.75kw
Voltage: 220V/380V/110V
Working pressure: 8-10Bar
Working noise: <70dB
Outer clip size: 11”-22”
Inner clip size: 12”-24”
Net weight: 360kg
Gross weight: 380kg
Packing size:1230*1000*1800
14.Fuel Injector Cleaner (Set)
ZC-QC007D
a. LED display screen;
b. Cleaned by built-in ultrasonic wave;
c. To drain liquid faster, add 2 values to the front of the machine. Sparks and open flames are prohibited.
d. Cleanser: 20 Litterg. Technical specifications:
e. Tank capacity: 2000 ml. Graduating cylinder capacity: 125mlj. Speed range: 0~7500 rpmk. Number of injections: 0~9900 Step size: 100msl. PWM pulse: 0~20.0 ms Step size: 0.1 ms
f. System pressure: 0~0.6Mpa (adjustable). Time: 0~20 minutes (adjustable)
j. Ultrasonic cleaning power: 70Wp. Frequency: 50HZ±0.5q. Ultrasonic cleaning frequency: 28KHZ±0.5kHzr. Power supply: AC220V/AC110V±10%
h. Humidity: <85%
i. Ambient temperature: 0 ℃ ~ + 40 ℃
Weight: 10KGv. Automotive Actuators w. This module enables theoretical and experimental studies of actuators used in engine electronic control. Training plan to be implemented:
j． Gasoline injectorz. Exhaust gas recirculation (EGR) valve
k. High pressure diesel atomizer
l. Idle actuator cc with stepper motor. Electrical testing dd. Troubleshooting
m.Technical specifications:
n. Two-color schematic with 5 LEDs for locating test components in the vehicle
o. Analyze the injector control signal as the speed changes from 900 to 6000 rpm. Injection timing is adjustable from 2 ms to 12 ms
p. Exhaust gas recirculation valve with test point for analyzing the signal that adjusts the valve opening and duty cycle from 10% to 90%
. simulation? Common rail? Injector with for analysis from 0.1 to 0.7 ms
Test point for jj’s pre-injection time adjustment. Injection pulse delay from 0.7 to 4.5 ms
q. Injection times from 0.2 ms to 1.8 ms
r. The control frequency is between 15 Hz and 80 Hz (900-4000r.pm)mm. Injector opening pulse is 70 V
s. Stepper motor for idle speed control with 4 test points for analyzing the signal on each winding.
oh. Pilot tone adjustment range is 5 Hz to 50 Hz; four LEDs indicate winding deviation pp. Can reverse the direction of rotation and measure
Millimeter level
Displacement qq. Interconnects and test points – Ø2mm
t. Power supply unit:
u. Regulated voltage, electronic protection against short circuits and overloads
v. Knob tool for selecting desired voltage uu
w. Output 1: 1.3Vdc ÷ 24Vdc, 1A
x. Output 2: 24Vac – 0 – 24Vac, 0.5A
y. Output 3: +5Vdc – 2A
z. Output 4: +12Vdc – 2A
Year. Output 5: -12Vdc – 1A
zz. Power supply: 220~230V AC, 50Hz, 1 phase
aaa. Detergent: minimum 20 liters.
bb. Brand and model: indicated by the bidder ccc
. Country of Origin and Manufacturing: Mentioned by Bidder
ddd. Warranty: 1 (one) year, incl.
eee service. Manufacturer’s authorization letter and contact information, ISO certificate, CE certificate and catalog should be submitted
15.Spark Plug Cleaner
ZC-QC008D
a. Usage/Application: Spark Plug Cleaning & Testing.
b. Type: Automatic
c. Power Supply: 220 V 50 Hz
d. Working Pressure: 5 kgf/cm^2 – 12 kgf/cm^2
e. Spark plug used: M10,M12,M14 & M18
f. Brand & Model: To be mentioned by the bidder
g. Country of Origin & Manufacturing: To be mentioned by the bidder
h. Warranty: 1 (One) year with services
16.ATF Exchanger
ZC-QC009D
a. Cleans and changes the fluid in the gear box, solves the problem of incomplete replacement when manually changing the transmission oil.
c. Fully automatic identification of oil inlet and outlet direction
d. High- precision electronic flowmeter detection
e. Fully automated replacement of new and old oil
f. Automatic transmission cycle cleaning
g. Automatic filling
h. Automatically reduce the automatic transmission oil
i. Visual display of transmission radiator oil pressure
j. The latest ”standard oil quantity of each model” database
k. Regular maintenance
l. New and old oil temperature display
m. Electronic scale one- key clear
n. Technical Specifications:
o. Display : min 10 inch touch screen
p. Ambient temperature: -10~+40℃
q. Equal exchange error: ±0.01L
r. Relative humidity: < 85%
s. Voltage: DC12V
t. Maximum power: 150W
u. Oil pipe: min 2.3 m
v. Oil return pipe: min 2.3 m
w. Oil drain pipe: min 1.5m
x. Oil tank: min 20L × 2
y. Language: Chinese, English, German, Spanish
z. With printer
aa. Brand & Model: To be mentioned by the bidder
bb. Country of Origin & Manufacturing: To be mentioned by the bidder
cc. Warranty: 1 (One) year with services
dd. Manufacturer’s Authorization Letter with contact details and Catalogs should be submitted
17.Engine Lifter
ZC-QC010D
2T folding crane (60kg)
Maximum height: 2.35M
The shortest boom: 500KG
The longest boom: 200kg
Steel thickness: 2.2MM
Equipped with pulleys: 2 universal and 2 directional
18.Emission Analyzer (Petrol)
ZC-QC011D
Measuring range;
HC: 0~9,999 X10-6 (positive hospital equivalent)
CO :0~10 X 10-2 (%)
CO2:0~18 X 10-2(%)
O2: 0~25 X 10-2(%)
NO: 0~5,000 X10–6
Indication error;
HC: ±12 X10-6 (absolute) 0~2,000 X10-6
±5 X10-6 (relative) 0-2,000 X10-6 (take the larger error value)
±10 X10-2 (relative) 2,001–9,999 X 10-6
CO: ±0.06 X10-2 (%) (absolute)
±5X10-2(%) (relative) (take the larger error value)
CO2:±0.5 X10-2(%)(absolute)
±5
O2: ±0.1 X10-2(%)(absolute]
±5
NO: ±25 X10-6 (absolute)
±4 X10-2 (%) (relative) (take the larger error value)
Response time: no more than 10 seconds, Q2 no more than 12 seconds, NO no more than 15 seconds
Preheating time: 10 minutes (when the ambient temperature is not lower than 20℃)
Power supply: AC220V±10% 50Hz±1Hz or DC12V (optional car power inverter]
Operating temperature: +5℃~ +40℃
Humidity: 5%~95% [non-condensing]
Net weight:6,0Kg
Overall dimensions: 260mm (width) X 180mm (height) X 450mm (depth)
19.AC Gas Filling/Refiller
ZC-QC012D
a. Car air conditioning refilling kit
b. Digital manifold
c. Vacuum pump
d. Charging hose. Quick connector. Charging scale. Barrow. Small cylinders, including gasi. Warranty: 1 (one) year including servicej. Table of contents should be submitted
20.Brake Fluid Exchanger
ZC-QC013D
A. Universally suitable for cars, trucks and construction vehicles
b. easy to use
c. Only one person can complete the brake fluid replacement work. Give up the traditional tiring and boring way of changing oil. There is no dirty oil on the floor. Effectively repair vehicles. Quick oil change/drain, easy job. Warranty: 1 (one) year (including service)
21.Engine Stethoscope
ZC-QC014D
a. Diagnostic piston slap sound, sound gear wear.
b. Navigate to the dashboard from the engine banging and screaming
c. For all parts of the car, can quickly monitor abnormal sound of the site.
d. Suitable for cars, ships, aircraft, machine tools and other mechanical equipment.
e. Long Needle: min 250 mm
f. Short Needle: min 80 mm
g. Diameter: min 4 mm
h. Detecting noise frequency range: 10HZ – 10KHZ
i. Should include: 1 X Stethoscope Host, 1 X Instructions, 2 X Needles
j. Warranty: 1 (One) year with services
k. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
22.Air Blaster
ZC-QC015D
a. Air Power Drain Blaster Gun
b. High-Pressure Powerful Manual Sink Plunger Opener
c. Company catalog should be submitted
d. Warranty: 1 (One) year with services
25.Arc Welding M/C with All Accessories (Set)
ZC-QC016D
a.Rated input voltage (V) 220V/380V
b. Rated welding current (A) 80-480A
c. Current adjustment range 12(A) 100-500A
d.Power (KVA) 39.5
e.Welding diameter (mm) 2.5-4.0
f. Rated no-load voltage (v) 73
j. Load duration (v) 35
h.Protection level H
i. Wire material: copper wire
j. Overall dimensions (mm) 655*495*785
26.Diesel Engine
ZC-QC017D
One: Function introduction
1. It adopts Italian VM2.5 diesel engine assembly (easy to disassemble and assemble) and is assembled on a special engine disassembly and assembly flip frame.
In order to improve safety performance.
2. Using a deceleration flip mechanism, the engine can rotate at any angle and be locked at any position, making it easier for students to disassemble and assemble from different angles.
3. A large oil receiving pan is placed at the bottom to facilitate centralized storage of small parts or screws.
4. The disassembly and assembly flip frame adopts high-strength steel structure welding, the surface is spray-coated, and the bottom is equipped with a self-locking caster device, which is removable and convenient for teaching.
Two: Technical specifications
Equipment appearance: 1200×600×1100mm (length×width×height)
Steel pipe: 600*40*3mm
Swivel casters
The first two swivel casters with locking function
The rear two swivel casters
The casters and the stand are fixed with M6*4 screws to facilitate equipment repair and maintenance.
Casters: 60mm×50mm (diameter×width)
Caster support: 1.0T
Reducer: MOPA70; 1:70
Three: Basic configuration (each unit)
Serial number Name Specification Model Unit Quantity
1 Diesel engine assembly set 1
2 Disassembly and assembly of the flip frame (with self-locking caster device, with column steel pipe 200*200*5mm; 1200×680×850mm (length×width×height) table 1
3 Large area oil basin 660×590×35mm (length×width×depth) 1
4 reduction mechanism (with accessories such as rocker plate) set 1
27.Hydraulic Jack
ZC-QC018D
a. Minimum height: 75mm
b. Maximum height: 505mm
c. Product size: 700*340*162mm
d. Product weight: 30kg
28.Power steering system assembly
ZC-DL01A
【Product profile】
This equipment is based on the automobile front axle assembly and comprehensively demonstrates the structure and working process of the recirculating ball steering system and the front axle suspension system. It is suitable for the teaching needs of secondary and higher vocational schools and training institutions for automobile mechanical steering, front axle suspension theory and maintenance training, and fully meets the teaching functions of automobile front axle system structure display, work simulation, disassembly and assembly training and other teaching functions.
【Functional characteristics】
- Real and operational car steering system and front axle suspension components, fully demonstrating the structure of mechanical steering and independent suspension.
2. Manipulate the steering wheel to truly demonstrate the working process of the car’s mechanical steering.
3. There is a corner plate installed at the bottom of the wheel, which can display the steering angle of each wheel respectively. (Optional)
4. The base of the training platform is welded with a steel structure, and the surface is spray-coated. It is equipped with a self-locking caster device, which makes it flexible to move, safe, reliable, sturdy and durable.
【Technical specifications】
Dimensions: 1800×900×1100mm (length×width×height)
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Mobile casters: 100*50mm
【Basic configuration (for each unit)】
| serial number | Name | Specifications and models | unit | quantity |
| 1 | Front axle suspension mechanism | set | 1 | |
| 2 | Steering wheel, steering column, universal joint, steering gear, steering rod | set | 1 | |
| 3 | wheel | indivual | 2 | |
| 4 | Corner plate (optional) | indivual | 2 | |
| 5 | Mobile stand (with self-locking casters) | 1800×900×1100mm (length×width×height) | tower | 1 |
29.Power brake system assembly
ZC-DL02A
【Product profile】
This equipment is made of the actual ABS braking system, fully demonstrating the structure and working process of the ABS braking system.
It is suitable for the teaching needs of schools on ABS braking system theory and maintenance training.
【Functional characteristics】
1. Real and operational ABS braking system, fully demonstrating the structure and working process of the ABS braking system. Operate and control various switches to demonstrate the working process of the ABS brake electronic control system (solenoid valve working conditions, etc.).
2. The panel of the teaching board is made of high-grade aluminum-plastic panels that are impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer using a special process; the panel is printed with color circuit diagrams and working principle diagrams that will never fade; students can visually compare them. Use circuit diagrams and physical objects to understand and analyze the working principle of the electronic control system of the transmission.
3. There are detection terminals installed on the panel of the teaching pendant, which can directly detect the electrical signals of the circuit components of the ABS braking system, such as resistance, voltage, current, frequency signals, etc. on the panel.
4. The equipment is equipped with a diagnostic socket, which can be connected to a dedicated or universal car decoder to perform self-diagnostic functions such as reading fault codes, clearing fault codes, and reading data streams for the ABS braking system.
5. The equipment panel part adopts 1.5mm cold plate stamping structure, with beautiful appearance; the bottom part adopts steel structure welding, the surface is spray-painted, with self-locking caster device, and the base of the teaching board is equipped with a tabletop of about 40cm. Convenient for placing materials, testing instruments, etc.
6. The equipment works with ordinary 220V AC power supply, which is transformed into 12V DC power supply through internal circuit transformation and rectification. No battery is needed, which reduces the trouble of charging. The 12V DC power supply has anti-short circuit function.
【Technical specifications】
Dimensions: 1600×600×1700mm (length×width×height)
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Cabinet: 1.5mm cold plate stamping;
mobile casters: 100*60mm
【Basic configuration (for each unit)】
| serial number | Name | Specifications and models | unit | quantity |
| 1 | Inspection control panel with panel cabinet | Equipped with various detection terminals as well as color circuit diagrams and working principle diagrams (panel: 1200*900*4mm) | set | 1 |
| 2 | ABS brake system control computer (ECU) | Original car | set | 1 |
| 3 | Ignition Switch | indivual | 1 | |
| 4 | Diagnostic seat | Original car | indivual | 1 |
| 5 | ABS pump assembly | Original car | indivual | 1 |
| 6 | ABS indicator | Original car | set | 1 |
| 7 | main relay | Original car | indivual | 1 |
| 8 | Adjustable wheel speed device (with sensor) | indivual | 4 | |
| 9 | DC motor device | indivual | 4 | |
| 10 | brake switch | Only | 1 | |
| 11 | Power Transformers | set | 1 | |
| 12 | Leakage protection switches and accessories | set | 1 | |
| 13 | Mobile stand (with self-locking casters) | 1240×600×1700mm (length×width×height) | tower | 1 |
| 14 | Fault simulation and troubleshooting device | set | 1 |
30.2 Post Lift Hydraulic
ZC-QC019D
Motor power: 2.2kw
Voltage:220V/380V/110V/415V
Lifting weight: 4000kg
Lifting height: 1800mm
Minimum height:110mm
Total height:2800mm
Spacing between two columns: 2700mm
Gross weight:520kg
Packing size: 2800*450*750 880*300*300
31. Wheel Balancing M/C
ZC-QC020D
Motor power: 0.25kw
Voltage: 220V/380V/110V
Balance speed: ≤180rpm
Cycle time: 7S
Size: 10-24’’
Maximum tire weight: 70kg
Net weight: 158kg
Gross weight: 171kg
Packing size:1150*830*1200
32.Air Suspension System Model
ZC-KQXJ01A
【Product profile】
The automobile electronically controlled suspension and steering system training platform is based on the automobile air suspension and steering system and fully demonstrates the structure and working process of the automobile air suspension and steering.
It is suitable for the teaching needs of schools on the theory and maintenance training of air suspension and steering.
【Functional characteristics】
1. Real and operational automobile air suspension and steering system, fully demonstrating the composition and structure of automobile air suspension and steering system.
2. Manipulate the height control switch or adjust any suspension height. The air suspension ECU controls the compressor, height control solenoid valve, suspension shock absorber hardness controller and other executive components to complete the air suspension height and shock absorber hardness. adjustment, truly demonstrating the working process of the car’s air suspension and steering system.
3. The training table panel is made of 4mm thick high-grade aluminum-plastic panels that are corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer using a special process; the panel is printed with color circuit diagrams that will never fade; students can intuitively Compare the circuit diagram and the actual object to understand and analyze the working principles of the automobile air suspension and steering system.
4. There are detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of various circuit components of the air suspension and steering system, such as resistance, voltage, current, frequency signals, etc.
5. A fault indicator light and a diagnostic socket are installed on the panel of the training platform. The fault code can be flashed through a short wire to realize the self-diagnosis function of the system.
6. The base of the training platform is welded with a steel structure, and the surface is spray-coated. It is equipped with self-locking casters, making it flexible to move, safe, reliable, sturdy and durable.
【Technical specifications】
Dimensions: 1200×1000×1700mm (length×width×height)
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃～+50℃
Steel pipe: 60×40×3mm
Mobile casters: 100×50mm
panel cabinet: 1.5mm cold plate stamping and forming, with a maintenance door on the back;
【Basic configuration (for each unit)】
| serial number | name | Specifications and models | unit | quantity |
| 1 | Test control panel | Equipped with various detection terminals and color circuit diagrams; panel: 950*900*4mm | set | 1 |
| 2 | Air suspension control computer (ECU) | set | 1 | |
| 3 | Diagnostic seat | indivual | 1 | |
| 4 | compressor | tower | 1 | |
| 5 | No. 1 height solenoid valve | indivual | 1 | |
| 6 | No. 2 height solenoid valve | indivual | 1 | |
| 7 | height control relay | indivual | 1 | |
| 8 | height control switch | indivual | 1 | |
| 9 | Left and right front suspension control actuators | set | 1 | |
| 10 | Left and right front control sensors | set | 1 | |
| 11 | Left and right rear suspension control actuators | set | 1 | |
| 12 | Left and right rear control sensors | set | 1 | |
| 13 | Angle sensor | indivual | 1 | |
| 14 | Various analog switch signaling devices | set | 1 | |
| 15 | Load simulated spring | set | 1 | |
| 16 | Mobile stand (with self-locking casters) | 1200×1000×1700mm (length×width×height) | tower | 1 |
| 17 | Fault simulation and troubleshooting device | set | 1 | |
| 18 | Electronically controlled steering device | set | 1 | |
| 19 | Booster pump drive motor | Only | 1 |
33.Wheel Alignment M/C
ZC-QC021D
Voltage: 220V/110V/240V
Display numbers: 0.1mm/0.01°
Toe-in: ±0.01°Measuring range: ±40°
Camber angle: ±0.01° Measuring range: ±45°
Caster angle: ±0.02° Measuring range: ±45°
Inclination angle: ±0.02° Measuring range: ±45°
Thrust angle: ±0.02° Measuring range: ±40°
Steering angle: ±0.02°Measuring range: ±50°
Setback angle: ±0.01° Measuring range: ±40°
Wheelbase: ±2mm Measuring range:1219mm-2438mm
Wheelbase: ±2mm Measuring range: 2006mm-4572mm
34.Compression Tester
ZC-QC022D
The 9812 fast cylinder pressure gauge is suitable for measuring cylinder pressure values of various gasoline engine models; it is equipped with an M14 tooth extended alloy test rod for quick installation and measurement.
2.6-inch dial;
4 types of spark plug connectors: M18, M14, M12, M10
Test range: 0-300PSI (0-21KG)
The accuracy of the pressure gauge is 1.6.
36.Recondition Petrol Engine
ZC-QC023D
One:. Function introduction
1. Use Toyota Corolla 1ZR electronically controlled gasoline engine assembly (easy to disassemble and assemble), and assemble it on a special engine disassembly and assembly flip stand.
2. Using a deceleration flip mechanism, the engine can rotate at any angle and be locked at any position, making it easier for students to disassemble and assemble from different angles.
In order to improve safety performance, the engine adopts 2-side fixed flipping.
3. A large oil receiving pan is placed at the bottom to facilitate centralized storage of small parts or screws.
4. The disassembly and assembly flip frame adopts high-strength steel structure welding, the surface is spray-coated, and the bottom is equipped with a self-locking caster device, which is removable and convenient for teaching.
Two:. Technical specifications
Equipment appearance: 1200×600×1100mm (length×width×height)
Steel pipe: 60*40*3mm
Swivel casters
The first two swivel casters with locking function
The rear two swivel casters
The casters and the stand are fixed with M6*4 screws to facilitate equipment repair and maintenance.
Casters: 60mm×50mm (diameter×width)
Caster support: 1.0T
Reducer: MOPA70; 1:70
Three:. Basic configuration (each unit)
Serial number Name Specification Model Unit Quantity
1. electronically controlled gasoline engine assembly set 1
2. Disassembly and assembly of the flip frame (with self-locking caster device, with column steel pipe 200*200*5mm) 1200×680×850mm (length×width×height) table 1
3. Large area oil basin 660×590×35mm (length×width×depth) 1
4. reduction mechanism (with accessories such as rocker plate) set 1
37.Diesel Smoke Tester
ZC-QC024D
measurement accuracy;
Opacity N:0~99.99%
Light absorption coefficient k: 0~16.0m”
Resolution: Opacity N: 0.1%
Indication error: opacity N: ±2.0%
Power supply: AC220V±10% 50Hz1HZ
weight:
Control unit:5.5kg
Measuring unit: 6.5kg
Dimensions:
Control unit: 370mm (width) X 280mm (depth) X 220mm (height)
Measuring unit: 410mm (width) X 215mm (depth) X 360mm (height)
38.A/C Leak Tester/Detector
ZC-QC025D
a. Ultrasonic leakage detector is designed to locate the source of the ultrasonic emissions generated by gas, air leaks
b. The leakage level is displayed by ”Bar LED Display Panel” and converted to audible sound by either internal buzzer
c. Sensitivity for Leakage Bar LED display panel & audible tone
d. The LED display indicator of the detector is a relative measurement only
e. Frequency Response: 20 KHz to 100 KHz
f. Ultrasonic transmitter:
g. Frequency output: 40KHz
h. Oscillator Circuit 640 KHz crystal time base & divided by 16
i. Operating Humidity Less than 80% RH
j. Power Supply: DC 9V battery
k. Brand & Model: To be mentioned by the bidder
l. Country of Origin & Manufacturing: To be mentioned by the bidder
m. Warranty: 1 (One) year with services
n. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
39.Brake Fluid Tester
ZC-QC026D
a. Immerse the probe into brake fluid and you will get different colors of LED lights, they indicate:
b. Green Light: indicates the brake fluid water content is below 1%
c. The First Yellow Light: indicates the brake fluid water content is approximately 1.5%
d. The Second Yellow Light: indicates the brake fluid water content is approximately 2.5%
e. The First Red Light: indicates the brake fluid water content is approximately 3%
f. The Second Red Light: indicates the brake fluid water content is more than 4%
g. After inserting the battery, press POWER button to turn on the tester, all LEDs lights turn on with buzzer sounding, which indicates the product self-test is successful2
h. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
i. Warranty: 1 (One) year with services
j. Brand & Model: To be mentioned by the bidder
k. Country of Origin & Manufacturing: To be mentioned by the bidder
40.Impact Wrench Set
ZC-QC027D
20V lithium battery brush 1/2″ impact wrench
Rated voltage: 20V
Power output: 300W
No-load speed: 0-2850rpm
Knock frequency: 0-3250ipm
Maximum torque: 339Nm
Separation torque: 542Nm
Battery: 20V 4A + fast charge
With LED light
Tool chuck: 12.7mm (½”)
Net weight: 1kg
41.Cylinder Bore Gauge Set
ZC-QC028D
Graduation value: 0.01mm
Measuring range: 50-160mm
42.Magnetic Dial Gauge
ZC-QC029D
- Material: metal + zinc alloy
- Leverage dial indicator
- Accuracy: 0.01mm
- Measuring range: Min.10mm
- Dial diameter: 32mm
- Universal magnetic base holder
- Clamping hole diameter: 8mm
- Warranty: 1 (One) year with services
- Brand & Model: To be mentioned by the bidder
- Country of Origin & Manufacturing: To be mentioned by the bidder
43.Telescoping Gauge
ZC-QC030D
a. Size: Min.8-150mm
b. 6pcs Telescoping Gauge Set
c. Inner Diameter Expansion Gauge
d. Constant spring tension gives uniform contact pressure
e. Material: Cr Stainless Steel
f. Warranty: 1 (One) year with services
g. Brand & Model: To be mentioned by the bidder
h. Country of Origin & Manufacturing: To be mentioned by the bidder
49.Rotational Radius Gauge
ZC-QC031D
a. Concave and convex blades.
b. With nickel plated case and locking screw.
c. For the checking of sectors of circle.
d. Radius: Min.7.5~15mm
e. Blade number: Min.16 Blades × 2
f. Brand & Model: To be mentioned by the bidder
g. Country of Origin & Manufacturing: To be mentioned by the bidder
h. Warranty: 1 (One) year with services
i. Manufacturer’s Authorization Letter with contact details and Catalogs should be submitted
50.Toe-in Gauge
ZC-QC032D
a. Material: Aluminum alloy + Stainless steel
b. Use range: 26/27.5/29/700C
c. Shrinkage length 235mm, stretch length 388mm
d. Rotation angle: 360°
e. Applicable models: most bicycles
f. Warranty: 1 (One) year with services
g. Brand & Model: To be mentioned by the bidder
h. Country of Origin & Manufacturing: To be mentioned by the bidder
51.Tyre Inflator Gauge
ZC-QC033D
a. Pressure gauge range: 0 – 200PSI
b. Length: 150mm
c. Brass nozzle with Aluminum alloy body
d. Warranty: 1 (One) year with services Brand & Model: To be mentioned by the bidder
e. Country of Origin & Manufacturing: To be mentioned by the bidder
52.Air Ratchet Wrench
ZC-QC034D
a. Size: 1/ 2”
b. Square Size: 12.6mm
c. Revolutions: 160rpm
d. Torque: 88N.m
e. Working pressure: 6.3kg/cm2
f. Air tube diameter:10mm
g. Warranty: 1 (One) year with services
h. Brand & Model: To be mentioned by the bidder
i. Country of Origin & Manufacturing: To be mentioned by the bidder
53.Vacuum Pressure Gauge
ZC-QC035D
a. This vacuum gauge is a dual scale dial gauge
b. The measurement range is 0~-30inHg
c. The metal case protects the internal fittings
d. Easy to carry
e. Dial size: 2” dial size
f. Window: glass
g. Warranty: 1 (One) year with services
h. Brand & Model: To be mentioned by the bidder
i. Country of Origin & Manufacturing: To be mentioned by the bidder
55.Engine Repair Tool Set
ZC-QC036D
Skadden 129 piece tool set
•10 pieces of 6.3MM series 6-angle sockets (4,5,6,7,8,9,10,11,12,13)
•4 pieces of 6.3MM series 6-corner long sleeves (8,9,10,12)
•9 pieces of 10MM series 6-angle sockets (11,12,13,14,15,16,17,18,19)
•4 pieces of 10MM series 6-corner long sleeves (13, 14, 1517)
•8 pieces of 10MM series 6-corner flower-shaped sleeves (E8, E10, E11, E12, E14, E16, E18, E20)
•2 pieces of 10MM series spark plug sleeves (16,21)
•7 pieces of 12.5MM series 6-angle sockets (20, 21, 22, 24, 27, 30, 32)
•17 pieces of 10MM series screwdriver sockets: flower-shaped (T20, T30, T40, T45, T50, T55, T60); hexagonal (3,4,5,6); rice-shaped (#1, #2); cross-shaped (#1,#2); straight line (5.5,6.5)
•3 pieces of professional quick-release ratchet wrenches (6.3MM series 5″, 10MM series 8″, 12.5MM series 10″)
•3 pieces of universal joints (6.3MM, 10MM, 12.5MM)
•2 pieces of 10MM adapters (3/8″ square hole x 1/4″ square head, 3/8″ square hole x 1/2″ square head)
•5 pieces steering adapter (6.3MM series 2″, 10MM series 3″, 10MM series 6″, 12.5MM series 5″, 12.5MM series 10″)
•1 piece 6.3MM series rotating handle
•1 piece of 6.3MM series driver head connector (6.3MM driver head socket)
•9 pieces of 6.3MM series screwdriver heads: square (4, 5, 6.5); cross (#1, #3); hexagonal (3, 4, 5, 6)
•11 pieces of fully polished combination wrenches (8,9,10,11,12,13,14,16,17,18,19)
•1 piece A series Phillips screwdriver (PH2x100mm)
•1 piece A series slotted screwdriver (6x100mm)
•1 piece special driver socket for T52 engine cylinder head screws
•1 piece dual-purpose filter wrench 63-102MM
•1 piece of car voltage test pen 6V/12V/24V
•1 piece M16 oil pan drain socket driver bit (with hole)
•1 piece H17 oil pan socket bit
•1 piece 10MM series 12-corner thin-walled spark plug sleeve 14MM
•10-piece extended Allen wrench set
•9-piece extended center hole flower-shaped wrench set
•1 piece of 12.5MM series three-way connector (1/2″ square hole x 3/8″ square head)
•3 pieces of extended X-handle dual-purpose quick levers 10MM, 13MM, 17MM
•1 piece fully polished combination wrench 15MM
56.Service Tool (Set)
ZC-QC037D
77 piece tool set
Electric drill*1
Electric drill handle*1
Adjustable wrench*1
Claw hammer*1
Storage box*1
10M raw material tape*1
Water pump pliers*1
Vise*1
Needle nose pliers*1
Tape measure*1
Socket set
11 pieces of hexagonal wrenches: specifications 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6
Hand saw*1
Multifunctional digital display pen*1
2 pieces of screwdrivers: cross, flat
electrical tape
Bit adapter
Utility knife*1
Batch*2
Construction drill*3
Twist drill*3
Clock batch*4
57.Welding & Brazing Set
ZC-QC038D
30mm cutting torch: can cut mild steel Thickness: 30mm
An oxygen meter
Acetylene meter
A set of 10 meters two-color pipe
A cutting gun
58.Blow Lamp
ZC-QC039D
Tank volume: 1L
Fuel: kerosene
Tank height: 135mm
Diameter: 120mm
Net weight: 1.2kg
61.Petrol Engine (CRBT)
ZC-QC040D
One.: Function introduction
1. Adopt Toyota 5A-FE electronically controlled gasoline engine assembly (easy to disassemble and assemble), and assemble it on a special engine disassembly and assembly flip frame.
2. Using a deceleration flip mechanism, the engine can rotate at any angle and be locked at any position, making it easier for students to disassemble and assemble from different angles.
In order to improve safety performance, the engine adopts 2-side fixed flipping.
3. A large oil receiving pan is placed at the bottom to facilitate centralized storage of small parts or screws.
4. The disassembly and assembly flip frame adopts high-strength steel structure welding, the surface is spray-coated, and the bottom is equipped with a self-locking caster device, which is removable and convenient for teaching.
Two:. Technical specifications
Equipment appearance: 1200×600×1100mm (length×width×height)
Steel pipe: 60*40*3mm
Swivel casters
The first two swivel casters with locking function
The rear two swivel casters
The casters and the stand are fixed with M6*4 screws to facilitate equipment repair and maintenance.
Casters: 60mm×50mm (diameter×width)
Caster support: 1.0T
Reducer: MOPA70; 1:70
Three:. Basic configuration (each unit)
Serial number Name Specification Model Unit Quantity
1> electronically controlled gasoline engine assembly set 1
2> Disassembly and assembly of the flip frame (with self-locking caster device, with column steel pipe 200*200*5mm) 1200×680×850mm (length×width×height) table 1
3> Large area oil basin 660×590×35mm (length×width×depth) 1
4> reduction mechanism (with accessories such as rocker plate) set 1
82.Tire Pressure Gauge
ZC-QC041D
Accuracy: ±1PSI
Four units: PSI, BAR, KPA, KG//CM2
LED intelligent digital display
Measuring range: 0-150PSI 0-10KG/CM2
Weight: 0.2kg
Size: 10*6*3CM, tube length is about 27.5CM
83.Sledge Hammer
ZC-QC042D
a. Wooden handle sledge hammer
b. Standard: DIN 6475
c. Material: C45
d. HRC: 45-48
e. Size: 4lb or higher
f. Brand & Model: To be mentioned by the bidder
g. Country of Origin & Manufacturing: To be mentioned by the bidder
h. Warranty: 1 (One) year with services
i. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
84.Tube Vulcanizing Machine
ZC-QC043D
380 degree temperature adjustment 32 digital display anti-blocking (3M anti-scalding thread)
Power: 1200W
Heating speed: 1 minute
Support voltage: 220V
Adjustable base, wide and thick pure aluminum panel, 3 meters anti-scalding and anti-freeze line
Automatic constant temperature: 100-320 degrees adjustable
Extremely fast cooling: safe dual-zone cooling
Machine control: switch control
Precise digital display: intelligent temperature display
85.Valve Lapping Stick
ZC-QC044D
Manual grinding rod, used for grinding dust accumulated in automobile engine cylinders
Total length: 22.5mm
Suction cup diameter: 2cm, 2.8cm
88.Filler Gauge
ZC-QC045D
a. This gauge should be used to check flatness & gap between mating parts
b. Range: Min.0.001” to 0.025” / 0.025mm to 0.63mm
c. Blade length: Min.3” and 4”
d. Size: (0.025, 0.038, 0.050, 0.063, 0.076, 0.101, 0.127, 0.152, 0.177, 0.203, 0.228, 0.254, 0.279,0.304, 0.330, 0.355, 0.381, 0.406, 0.431, 0.482, 0.508, 0.533, 0.558, 0.584, 0.609, 0.635mm)
e. Brand & Model: To be mentioned by the bidder
f. Country of Origin & Manufacturing: To be mentioned by the bidder
g. Warranty: 1 (One) year with services
h. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
90.Side Cutting Plier
ZC-QC046D
Specifications: 6-inch multifunctional diagonal nose pliers
Material: Forged from industrial grade chromium vanadium steel
Sharp cutting, strong and durable, high frequency quenching, PVC rubberized handle.
Clamp head width: 20mm
Clamp length: 39mm
Handle width: 55mm
Total length of pliers: 159mm
92.Circlip Pliers
ZC-QC047D
6 inch outer straight circlip pliers
Overall length: 150mm
Top of clamp head: 35mm
Head diameter: 1.7mm
Outside of handle: 80mm
Opening diameter: 36mm
Material: high-hardness alloy steel, anti-rust treatment, high-frequency quenching
93.Bench Vice
ZC-QC048D
6 inch heavy duty bench vise
Jaw length: 150mm
Clamping force: 200cm
High carbon steel jaw design, stable clamping and not easy to slip. Strengthened chassis, 360-degree rotation.
95.Battery Cell Tester
ZC-QC049D
Suitable for 12V/24V batteries.
With protection function, even if the positive and negative poles are connected incorrectly, the device and battery will not be damaged.
Function: startup test, charging test, battery test, load test
Usage: Ordinary lead-acid batteries for all vehicles, EFB batteries, AGM flat batteries, AGM coiled batteries, GEL gel batteries, etc. 13 languages available.
Test standards and scope:
CCA: 30-2000
DIN: 30-2500
IEC: 30-2500
EN：30-3000
GB: 30-200Ah
JIS: 26A17-N135
Shell material: Acid-resistant ABS plastic
96.Grease Gun
ZC-QC050D
Standard single piston grease gun
Piston diameter: 8.5mm
Specifications: 600cc
Pipe diameter: 56mm
Length: 420mm
Refueling method: suck oil from the barrel of butter into the barrel
97.Oil Can
ZC-QC051D
High-pressure engine oil pot, the pot body is forged from high-quality high-carbon steel.
Specifications: 200ml
Pot body height: 125mm
Pot bottom diameter: 65mm
Grease nozzle length: 80mm
99.Valve Spring Compressor
ZC-QC052D
Carbon steel valve overhead clamp
Compression range: 200mm
Spring Compressor “C” Clamp (Min. 300x155mm)
Three-dimensional ball head extractor: 48*16mm
Two-jaw tie rod ball end extractor: 48*19mm
Large steering hip ball head puller: 48*23mm
Small size steering hip ball head puller: 48*25mm
Japanese ball head extractor: 48*30mm
3 ball head extractors: Japanese style 113mm, European style 113mm,/74mm)
1 pressure rod: length 10mm
Plastic box packaging
Outer box size: 340*215*45mm
Net weight: 2.2kg
100.Piston Ring Expander
ZC-QC053D
Product material: alloy steel
Clamping range: 50-100mm
Total length: 210mm
Weight: 0.244KG
101.Piston Ring Compressor
ZC-QC054D
Height: 75mm
Total weight: 0.3kg
Material: 65 manganese steel
Adjustment range: Φ53-125mm
Wrench size: 77*77mm Φ6mm
102.Cylinder Ridge Remover
ZC-QC055D
a. Reamer removes ridges from top of engine cylinders
b. Bore diameters: 3 to 5” (77 to 127mm)
c. Tungsten carbide cutters and fine-thread feed-up ensure smooth cutting action
d. Brand & Model: To be mentioned by the bidder
e. Country of Origin & Manufacturing: To be mentioned by the bidder
f. Warranty: 1 (One) year with services
103.Scraper
ZC-QC056D
High carbon steel wooden handle putty knife
Specifications: 2 inches
Total length: 186MM
Weight: 47g
Blade width: 50mm
104.Tap Set (HSS)
ZC-QC057D
12-piece tap wrench set
1. Tap models: M3-0.5; M4×0.7; M5×0.8; M6×1.0; M7×1.0; M8×1.25; M9×1.25; M10 x 1.5; M12 x 1.75
2. Die model: M3-0.5; M4×0.7; M5×0.8; M6×1.0; M7×1.0; M8×1.25; M9×1.25; M10 x 1.5; M12 x 1.75
3. Tap hand: M3-M12
4. Die wringer: M25
5. Material: high speed steel
106.Mechanical Jack (Screw type)
ZC-QC059D
3.2T screw jack
Self height: 220mm
Lifting height: 110mm
Maximum height: 330mm
Top diameter: 41mm
107.Flaring Tool Set
ZC-QC060D
a. Standard Flaring Tool Set
b. Flares: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 5/8” & 3/4” O/D
c. Should include 5 swage adapters that swage 7 tube sizes (3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8” and 3/4”)
d. Combination tubing flaring and swaging
e. Adapter : Swivel type swaging.
f. Flaring cone : Made of sturdiest steel and chromed
g. Case :Plastic durable case with handle.
h. Warranty: 1 (One) year with services
i. Catalogs should be submitted
j. Brand & Model: To be mentioned by the bidder
k. Country of Origin & Manufacturing: To be mentioned by the bidder
119.Spark lighter
ZC-QC062D
Spark-L Metal Single Point Pulse Gun
Suitable for gas and liquefied gas stoves
Comfortable appearance design, easy to hold
Drop-resistant, durable and easy to use
Length: 27CM (tube length: 13CM)
121.Tire Lever
ZC-QC063D
Specifications: 60*19MM
Car tire sleeve, booster bar, crowbar
Material: hard carbon steel
Overall length: 60CM
The smallest diameter at the top is 1.4CM
Round diameter 1.9CM
The flat part is about 6CM long
Weight: about 1.1KG
122.Alternator Regulator Tester
ZC-QC064D
WORKING VOLTAGE RANGE：7-30V
BATTERY TEST RANGE：3-220AH
SYSTEM TESTING：12V&24V BATTERY SYSTEM TEST
APPLICATION：12V CAR BATTERY/12V MOTORCYCLE BATTERY
LED LIGHTINSTRUCTION：YES
123.Tachometer
ZC-QC065D
a. Display: LCD, size min 32 mm x 28 mm. 5 digits with display unit
b. Measuring range (Photo Tach): 5 to 99,999 rpm
c. Measuring range (Contact Tach): 0.5 to 19,999 rpm
d. Surface speed (m/min): m/min- 0.05 to 1,999.9 m/min, ft/min- 0.2 to 6,560 ft/min, in/min. – 2.0 to 78,740 in/min
e. Resolution: rpm (0.1 to 1 rpm), m/min (0.01 to 0.1 m/min), ft/min (0.1 to 1 ft/min), in/min (0.1 to 1 in/min)
f. Accuracy: ± ( 0.1% + 1dgt )
g. Time base: Quartz crystal
h. Circuit: Exclusive one-chip of microcomputer LSI circuit
i. Memory: Memorize Last/Max./Min. value with recall
j. Power: Battery
k. Standard accessories with printed operation manual
l. Brand & Model: To be mentioned by the bidder
m. Country of Origin & Manufacturing: To be mentioned by the bidder
n. Warranty: Minimum 1 (One) year with services
o. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
124.Battery High Discharge Tester
ZC-QC066D
Charging within 5V, current 0.1A-40A，Discharge within 5V, current 0.1A-40A
Voltage range: 0-5V
Voltage accuracy: 0.2%+0.003V
Current range: 0.1-40A
Current accuracy: 0.2%+0.01A
Discharge mode: CC constant current discharge/CP constant power
Discharge termination: time/voltage is lower than the set lower limit/manual
Discharge power: maximum 200W
Charging mode: CV constant current and constant voltage charging
Charging termination: constant voltage current is lower than the set lower limit/manual
Capacity measurement: within 10Ah, resolution 0.001Ah 10Ah-100Ah, resolution 0.01Ah
100Ah or more, resolution 0.1Ah
Cooling method: fan active cooling
Equipment power supply: AC 200-240V (110V power supply can be customized)
Packing weight: 5.4Kg
125.AC Refrigerant Cylinder with Gas
ZC-QC067D
R-134 refrigerant
Capacity: 13.6KG/can
126.S.S.T. (Special Service Tools) Set
ZC-QC068D
101Pcs Mechanical Tool Set should contain the followings:
a. 1PCS-6.3mm Extension Bar (for screwdriver bit);
b. 33pcs screwdriver bits;
c. 1pcs square extension bar;
d. 1pcs water pump plier 10”;
e. 1pcs combination plier 6”;
f. 1pcs diagonal plier 6?;
g. 9pcs hex key (1.5/2/2.5/3/4/5/6/8/10mm);
h. 2pcs ratchet wrench 1/4” and 3/8”;
i. 1pcs universal Joint 1/2”;
j. 2pcs spark plug wrench 16/21mm;
k. 1pcs extension bar 5”;
l. 1pcs sliding tee bar 1/2”;
m. 13pcs -6.3mm socket (metric) 4/4.5/5/5.5/6/7/8/9/10/11/12/13/14mm;
n. 2pcs 6.3mm extension bar 2” /4”;
o. 1pcs 6.3mm universal Joint;
p. 1pcs sliding tee bar 6.3mm;
q. 1pcs connecter 1/2F*3/8M;
r. 8pcs combination spanner 8/9/10/11/12/13/14/17mm;
s. 1pcs 300G machinist hammer;
t. 5pcs screwdriver 3*75-, 3*75+, 5*100-, 5*100+, 6*150+;
u. 15pcs 12.5mm metric socket 12/13/14/15/16/17/18/19/20/21/22/24/27/30/32mm
x. Brand & Model: To be mentioned by the bidder
y. Country of Origin & Manufacturing: To be mentioned by the bidder
z. Warranty: Minimum 1 (One) year with services
aa. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
127.AC Refrigerant Filling and Vacuum Meter with Accessories Set
ZC-QC069D
a. Ideal for R134 & R502 refrigerants.
b. Connect fittings with high pressure safety valve.
c. Manifold Gauges A/C Tester Refrigerant Gas Service Diagnostic Kit with Quick Couplers.
d. Complete Diagnostic and Service Gauge Set for use on Air Conditioning Systems (Automotive / Home).
Technical Specifications:
e. 3.5CFM 1/4HP HVAC Air Vacuum Pump
f. Manifold Gauge Set
g. Material: Plastic & Metal
h. Hose Length: min 90 cm/36”
i. Hose working pressure: min 500 PSI.
j. Hose Burst pressure: min 2500 PSI.
k. Hose fittings : 1/4” SAE
l. High Pressure: 0~500 PSI
m. Low Pressure: 0~220 PSI
n. Temperature Scale: Celsius
o. Blue Coupler Inside Diameter: min14 mm
p. Red Coupler Inside Diameter: min16 mm
q. Warranty: 1 (One) year with services
r. Brand & Model: To be mentioned by the bidder
s. Country of Origin & Manufacturing: To be mentioned by the bidder
Catalog should be submitted
128.Refrigerant Filling Meter with Accessories Set
ZC-QC070D
Features
1. R134a special refrigerant recovery and filling equipment
2. Multiple functions of recovery, regeneration, vacuuming, filling and refueling
3. High-power compressor, fast recovery speed.
4. LCD menu display, simple and convenient operation
5. Electronic scale measuring device to ensure recycling and filling accuracy
6. Microcrystalline tempered panel, durable and non-weary
7. Touch sliding button, responsive and easy to operate
8. Inflatable and pressurized vacuum leak detection, equipped with small bottle refrigerant charging interface, wide application range.
Technical Parameters
1. Voltage: AC220V/50Hz
2. Maximum power: 650W
3. Recovery rate: ≤480g/min
4. Filling rate: ≤900g/min
5. Filling accuracy: ±10g
6. Charging range: 0-12kg
7. Compressor: 3/8HP
8. Vacuum pumping rate: 90L/min
9. Refrigeration tank capacity: ≤12L
10. Refrigerant type: R134a
130.Rivet Gun
ZC-QC071D
Guide mouth: 2.4/3.2/4.0/4.8mm
Stroke and pulling force: 16MM stroke 1848KGS pulling force
Pullable rivets: iron, aluminum, aluminum alloy
Net weight: 1.5KG
Air pressure: 6-8KG
Height: 270MM
131.Soldering Gun Set
ZC-QC072D
Power supply voltage: AC 220V-50Hz
Input power: 200W
Temperature range: 200℃-500℃
Heating time: ≤ 50S
Temperature control accuracy: ±5℃ (no load state)
Heating component: ceramic heating core
Insulation resistance: ≥100MΩ
Soldering iron length: 270MM
Soldering iron weight: 0.54KG
Power cord: 1.6M
133.Car Stereo Set
ZC-QC073D
Screen size: 7 inches
Operating system: Android 10.0
CPU quad-core processor
GPS navigation, mobile phone interconnection, wifi, Bluetooth, USB, AUX playback, music, film and television, radio.
134.Wiper Motor Assembly (Model)
ZC-QC074D
One:. Product introduction:
This practical training system is based on a real car wiper system and integrates all relevant control switches and actuators on a teaching board to systematically demonstrate the working principle of the car wiper system. It can carry out practical training operations such as demonstration experiments, fault diagnosis, and data measurement of automobile wiper systems.
Two:. Functional features:
1. A real and operational car wiper system, fully demonstrating the structure and working process of the car wiper system.
2. The training platform integrates the wiper motor assembly, wiper linkage mechanism, washer pump motor, wiper relay, wiper control switch, etc.
3. The measurement panel of the training platform is painted with a color inkjet circuit diagram and is equipped with detection terminals. The electrical signals of the wiper motor, wiper switch, and wiper relay, such as resistance, voltage, current, frequency signals, etc., can be directly detected on the panel. .
4. The training platform is equipped with a fault setting system, which can set one or more common faults to simulate the circuit fault of the wiper system to achieve the purpose of examination and assessment.
Three:. Materials and processes:
1. The measurement panel of the training platform is made of high-strength acrylic sheet with a thickness of 8mm, which is resistant to large temperature differences, wear-resistant, moisture-proof, anti-corrosion, not easy to deform, has a long service life, has bright colors, and is not easy to fade.
2. The training platform is made of international standard aluminum alloy profiles. It has the characteristics of light weight, high strength, corrosion resistance, and long life. It does not need to go through the spraying process, is more environmentally friendly, and has a more beautiful and high-end appearance. The platform has self-locking casters. The device is flexible to move, safe, reliable, sturdy and durable.
3. The base of the training platform is made of high-grade environmentally friendly synthetic wood boards and aluminum alloy profiles. It has two practical and beautiful drawers for placing daily teaching supplies.
4. The grooves of the aluminum alloy profile are inlaid and covered with PVC strips, which not only has a dust-proof effect, but also outlines the outline of the entire training platform, making it more beautiful.
Four:. Teaching content:
1. Understanding the configuration and composition of the car wiper system
2. Understand the control principle of the car wiper system
3. Master the basic knowledge of car wiper system
4. Understand the working principle of the wiper system
5. Able to independently list and explain the components of the wiper system
6. Understand the working conditions of the actuator of the car wiper system
7. Independently troubleshoot, maintain and repair the car wiper system
Five:. Technical parameters:
1. Overall dimensions: 1600×700×1800mm (length×width×height)
2. Input power supply; AC 220V±10% 50Hz
3. Working power supply; DC12V
135.Head Light Beam Alignment Equipment
ZC-QC075D
Main features
1. It is used to detect the luminous intensity of the headlights of automobiles, motorcycles and other motor vehicles. It can manually measure the center offset of the high beam optical axis of the car headlights, the lamp height and the relative corner points of the light and dark cutoff lines of the low beam beams. Location;
2. It has a liquid crystal display interface, which has the advantages of easy operation, accurate measurement, low power consumption and can be powered by batteries;
3. It is an economical solution suitable for automobile repair and maintenance units to adjust and detect the beam irradiation position of motor vehicle headlights.
The main technical parameters
Measuring range:
Headlight center height: 50 ~ 130cm
Luminous intensity: 0 ~ 60,000cd (120,000cd can be customized)
High beam and low beam optical axis offset: upper 1゜30′ ~ lower 2゜30′ (upper 20cm/10m ~ lower 40cm/10m);
Left 2゜30′ ~ Right 2゜30′ (Left 40cm/10m ~ Right 40cm/10m)
Indication error: High beam luminous intensity indication error: ±12%
Detection distance: 50cm
Power source: DC12V power supply (can be provided by car cigarette lighter or battery); box laser power supply: four No. 7 DC1.5V batteries
Power consumption: whole machine <1W
Weight: about 30kg
Overall dimensions: 590mm (width) × 1810mm (height) × 590mm (depth)
137.Duel Angle Meter
ZC-QC076D
Technical Specifications:
a. Accuracy: ± (0.05°+1%)
b. Resolution:0.01°
c. Measuring Range Single Axis: 360°, Dual Axis: ±40°
d. Response Time: Beep: 60dB@30m
e. User Interface: Mono-color LCD with backlight
f. Supply Power: Rechargeable Li-Polymer 3.7V
g. Charger Port: 5V 500mA Mini type-B USB port
h. Power Consumption: 10uA(Standby), 20mA(Operation)
i. Standby Battery Life:2000 hours
j. Operating Battery Life:40 hours
k. Size: 70x70x28mm/2.7×2.7×1.1in
l. Weight: 119.7g/4.2oz
m. Should Include: Digital Angle Protractor, Charger, Data Cable, User Manual
n. Warranty: 1 (One) year with services
o. Brand & Model: To be mentioned by the bidder
p. Country of Origin & Manufacturing: To be mentioned by the bidder
138.Mini Hydraulic Press Machine
ZC-QC077D
32T heavy duty with jack
Total height: 155CM
Maximum stroke: 80CM
Press block: 18*18*2CM
Inner width: 49CM
Weight: 78KG
139.Dashboard Model, Set
ZC-QC078D
One:. Product introduction
This equipment is based on the actual instrument system of Toyota Corolla and fully demonstrates the structure and working process of the instrument system.
It is suitable for the teaching needs of schools on automobile instrument system theory and maintenance training.
Two:. Functional features
1. A real and operational automotive electronic instrument system, fully demonstrating the composition and structure of the automotive electronic instrument system.
Manipulating various sensors and switches connected to the instrument system and simulating the work of the instrument signal source can truly demonstrate the working process of the automobile instrument system.
2. The panel of the teaching board is made of high-grade aluminum-plastic panels that are impact-resistant, pollution-resistant, fire-proof, and moisture-proof, and the surface is sprayed with primer using a special process; school students can visually compare the circuit diagram and the actual object to understand and analyze the work of the automotive electronic instrument system. principle.
3. There are detection terminals installed on the panel of the teaching pendant, which can directly detect the electrical signals of various circuit components of the automotive electronic instrument system on the panel, such as resistance, voltage, current, frequency signals, etc.
4. The panel part of the teaching board adopts a 1.5mm cold plate stamping structure, which has a beautiful appearance; the base part is welded with a steel structure, and the surface is spray-coated with a self-locking caster device. The base of the teaching board is equipped with a tabletop of about 40cm , convenient for placing materials, light testing instruments, etc.
5. The teaching board works with ordinary 220V AC power supply, which is converted into 12V DC power supply by transformer and rectification of the internal circuit. No battery is needed, which reduces the trouble of charging. The 12V DC power supply has anti-short circuit function.
Three:. Technical specifications
Overall dimensions: 1240×600×1700mm (length×width×height)
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Cabinet: 1.5mm cold plate stamped and formed, with a maintenance door on the back;
Mobile casters: 100*60mm
Four:. Basic configuration (each unit)
Serial No. Name Specification Model Unit Quantity
1 Detection control panel equipped with various detection terminals as well as color circuit diagrams and working principle schematics Set 1
2 ignition switch (with reading coil) pc 1
3 anti-theft keys with chip 1
4 engine control computer (ECU) set 1
5 instrument combination set 1
6 diagnostic seats OBDⅡ pcs 1
7 independent ignition coil without distributor 1 set
8 spark plugs 4
9 Crankshaft position sensor and signal wheel set 1
10 LED replacement nozzle set 1
11 oil pump relay set 1
12 Mobile stand (with self-locking caster device) 1240×600×1700mm (length×width×height) Table 1
13 Fault Simulation and Troubleshooting Device Set 1
140.SRS and Air Bag Circuit with Module, Set
ZC-QC079D
One: Product introduction
Based on the actual car airbag system, the structure and working process of the car airbag system are fully demonstrated.
It is suitable for the teaching needs of schools on the theory and maintenance training of automobile airbag systems.
Two:. Functional features
1. A real and operational automobile airbag system, fully demonstrating the structure of the automobile airbag system.
2. Maneuver the collision car to simulate the car collision process, simulate the rapid inflation and expansion of the left and right airbags, and truly demonstrate the working process of the car airbag system.
3. The panel of the teaching board is made of a 4mm thick high-grade aluminum-plastic panel that is corrosion-resistant, impact-resistant, pollution-resistant, fire-proof, and moisture-proof. The surface is sprayed with primer using a special process; the panel is printed with a color circuit diagram that will never fade; students can intuitively Compare the circuit diagram and the actual object to understand and analyze the working principle of the automobile airbag system.
4. There are detection terminals installed on the teaching board panel, which can directly detect the electrical signals of various circuit components of the automobile airbag system on the panel, such as resistance, voltage, current, frequency signals, etc.
5. A diagnostic socket is installed on the panel of the teaching board, which can be connected to a special or universal car decoder to perform self-diagnostic functions such as reading fault codes and clearing fault codes on the airbag control unit.
6. The panel part of the teaching board adopts a 1.5mm cold plate stamping structure, which has a beautiful appearance; the bottom part adopts a steel structure welding, and the surface is spray-coated. It is equipped with a self-locking caster device, which is flexible in movement, safe, reliable, sturdy and durable.
7. The teaching board uses ordinary 220V AC power supply, which is transformed into 12V DC power supply through internal circuit transformation and rectification. No battery is needed, which reduces the trouble of charging. The 12V DC power supply has an anti-short circuit function.
Three:. Technical specifications
Overall dimensions (length × width × height): 1240 × 600 × 1700mm
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃～+50℃
Steel pipe: 60*40*3mm
Cabinet: 1.5mm cold plate stamping;
Mobile casters: 100*60mm
Four:. Basic configuration (each unit)
Serial No. Name Specification Model Unit Quantity
1 Detection control panel equipped with various detection terminals, color circuit diagram and working principle schematic diagram Set 1
2 Airbag ECU set 1
3 ignition switch pcs 1
4 Diagnostic seat Diagnostic seat set 1
5 driver’s side airbag assembly set 1
6 Passenger side airbag assembly set 1
7 driver side airbag simulation bag set 1
8 passenger side airbag simulation bag set 1
9 left and right seat belt tighteners set 1
10 left and right collision sensors set 1
11 Collision trolley (with collision sensor) set 1
12 Crash Guides Set 1
13 air pipe set 1
14 Gas storage tank volume/working pressure: (m³/min/Mpa) 1
15 Barometer 0～1.6MPa 1
16 safety valves 1
17 exhaust valve pcs 1
18 drain valve pcs 1
19 fuse box pc 1
20 Mobile stand (with self-locking casters) 1240×700×1700mm (length×width×height) Table 1
21 Fault Simulation and Troubleshooting Device Set 1
141.Dent Removal Machine (Electric Operated), Set
ZC-QC080D
a. This device is designed specifically to be used with dents on flexible steel car bodies, dents like the kind caused by impact from hailstones, which leave smooth, rounded dents, can be removed.
b. Equipped with digital screen and relative control for both heating time and power settings.
Technical Specifications:
c. Input frequency: 50 Hz
d. Welding thickness : 0 .6-1.2 mm, Small welding traces.
e. Welding gun :min 2
f. Welding modes : Min 6 welding modes
g. Out put : Crbon rod,
h. Heating AC 3v-5v
i. Melting AC 1v-7v
j. Welding AC 1v-7v
k. Input power :min 1.8kw
l. Input current :max 22A
m. Voltage :220v
n. Accessories : 1xcarbon hammer, 1x Hook hammer , 1xmanual sucker ,2xcarbon rod ,10x Triangle straight pull sheet ,1xspanner for wrench ,1xHist ,1x manual with box
o. Power output cable: min1.5 m
p. Insulation class: F
q. Warranty: 1 (One) year with services
r. Brand & Model: To be mentioned by the bidder
s. Country of Origin & Manufacturing: To be mentioned by the bidder
t. Manufacturer’s Authorization Letter with contact details, ISO Certificate, CE Certificate and Catalogs should be submitted
142.Vacuum Dent Removal Machine, Set
ZC-QC081D
a. High quality aluminum alloy die-casting manufacturing for prolonged use.
b. The use of high density and high abrasion rubber chassis grab stronger environmental material.
c. Glass sucker is mainly used to get sucked glass tile floors, smooth surface electrostatic items of hand tools.
d. The use of rubber chassis toughness and deformation creates a vacuum, and with the atmospheric pressure will suck firmly goods, so as to achieve the purpose of the goods lift and handling.
Technical Specifications:
e. Material: Aluminum Alloy
f. Size: approx. 11.5×11.5×9.2cm
g. Net weight: approx. 412g
h. Sucker diameter: approx. 125mm
i. Horizontal suction: 50kg
j. Vertical suction: 35kg
k. Warranty: 1 (One) year with services
l. Brand & Model: To be mentioned by the bidder
m. Country of Origin & Manufacturing: To be mentioned by the bidder
143.Chain Block with Chain, Set
ZC-QC082D
a. The robust, closed construction is ideal for the workshop, agriculture and forestry, for crafts, industry and gardening and landscaping.
b. It is not only suitable for engine blocks, but for use in mines, factories, farms, construction sites, wharves, docks, and warehouses.
c. Capacity : min 2 T
d. Lifting height : min 5m
e. Load chain : 80 grad
f. Operating chain length : min 2x5m
g. Brand & Model: To be mentioned by the bidder
h. Country of Origin & Manufacturing: To be mentioned by the bidder
i. Warranty: 1 (One) year with services
j. Manufacturer’s Authorization Letter with contact details, ISO Certificate and Catalogs should be submitted
144.Dent Removal Hand Tools, Set
ZC-QC083D
a. Repairs dents in almost any place on any vehicle.
b. Developed and utilized by professional auto-body experts.
c. Easily removes dents from hail. Car doors, shopping carts and more without damaging the surface of car.
d. Should include: 1 x Glue Gun, 3 x Glue Pad and Stem (Size 2cm / 2.5cm / 3cm ), 1 x Glue Sticks, 1 x Knockdown Tool, 1 x Pulling Bridge and Knob, 1 x Wing Nut
e. Brand & Model: To be mentioned by the bidder
f. Country of Origin & Manufacturing: To be mentioned by the bidder
g. Warranty: 1 (One) year with services
145.Painting Spray Gun
ZC-QC084D
a. Container Capacity: min 800ml
b. Color: Any Color.
c. Style: Paint Zoom Sprayer.
d. Watt: min 900 watts.
e. Tube Length: min 1.6m.
f. Should include : 1-Piece Main Motor, 1-Piece Air Tube, 1-Piece Carrying Strap, 1-Piece Viscosity Measuring Cup, 1-Piece Spray Gun, 1-Piece Paint Container And 1-Piece Multi-language Instruction Manual and catalog.
g. Brand & Model: To be mentioned by the bidder
h. Country of Origin & Manufacturing: To be mentioned by the bidder
i. Warranty: 1 (One) year with services
j. Manufacturer’s Authorization Letter with ISO Certificate, CE Certificate and Catalogs should be submitted
146.Paint Mixture Table
ZC-QC085D
a. Ideal for mixing, stirring and diluting waterborne and solvent based paint
b. 100% stainless steel
c. Dimensions: min1090 x 690 x 1465 mm
d. Weight: min 45 kg
e. Brand & Model: To be mentioned by the bidder
f. Country of Origin & Manufacturing: To be mentioned by the bidder
g. Warranty: 1 (One) year with services
147.Car Paint Hand Tools
ZC-QC086D
a. Pressure [bar]: min 3
b. Nozzle size [mm]: 1.5
c. Quick coupler size [inch]: 1/4 ?
d. Capacity [l / min]: 410
e. Capacity [L]: 0.6
f. Brand & Model: To be mentioned by the bidder
g. Country of Origin & Manufacturing: To be mentioned by the bidder
h. Warranty: 1 (One) year with services
148.Engine ECU
ZC-QC087D
Toyota 5A-FE engine ECU
Replace the metal of the ECU with a transparent acrylic cover to facilitate teaching and explanation.
149.Fuse Box with Fuse & Relay, Set
ZC-QC088D
a. Universal For Auto Car SUV Off-Road Pickup Truck
b. Can be use both relay and fuse
c. Type: fuse holder
d. Interchange Part Number: Automotive Fuse Box Relay Holder 6 Relay 5 Road
e. Material: plastic+metal
f. Brand & Model: To be mentioned by the bidder
g. Country of Origin & Manufacturing: To be mentioned by the bidder
h. Warranty: 1 (One) year with services
150.ABS Module
ZC-QC089D
One:. Product introduction
This ABS braking system training platform is based on the Volkswagen Jetta ABS braking system and is equipped with a working principle diagram of the ABS system to truly demonstrate the working process of the ABS system during emergency braking.
It meets the teaching functions of the structure, composition and action demonstration of the ABS braking system.
It is suitable for the teaching needs of theoretical teaching and testing and maintenance training of automobile ABS braking system.
Two:. Functional features
1. Based on the real car ABS braking system, the structure of the ABS braking system is completely displayed.
2. The three-phase asynchronous motor drives the front and rear axles to rotate to simulate car driving. When the brake pedal is pressed in an emergency, the ABS system starts to work, the front and rear brake discs keep rotating slightly, and you can feel a constant bounce on the brake pedal, truly demonstrating the working process of the car’s ABS system.
3. There are color UV flat panel printed circuit diagrams and hydraulic pipeline diagrams on the training platform. Trainees can visually compare the circuit diagrams with the actual ABS braking system to understand and analyze the working principle of the control system.
4. There are detection terminals installed on the panel of the training platform, which can directly detect the electrical signals of each sensor and control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc.
5. The training platform is equipped with a pressure gauge, which can display the hydraulic changes of the brake master cylinder and four brake cylinders in real time.
6. A fault indicator light and a diagnostic socket are installed on the training bench panel, which can be connected to a special or general vehicle decoder to perform ECU code query, read fault codes, clear fault codes, and read data streams for the ABS/EBD electronic control system. , actuator testing, parameter setting, waveform analysis and other self-diagnostic functions.
Three:. Technical specifications
Overall dimensions: 1500×1000×1700mm (length×width×height)
Driving power supply: three-phase four-wire (three-phase five-wire 380V±10% 50Hz)
External power supply: AC 220V±10% 50Hz
Working voltage: DC 12V
Working temperature: -40℃-+50℃
Main oil channel pressure gauge: 0-250kg/psi
Brake wheel cylinder pressure gauge: 0-100kg/psi
Frequency converter:
Power: 4KW/5.5KW
Input: AC 3PH 380V±15% 50/60Hz
Output: 9A/13A AC 3PH 0-380V 0-400Hz
Three-phase asynchronous motor:
Voltage: AC 220V/380V 50Hz
Current: 11.8A/6.8A
Power: 3KW
Speed: 1420r/min
Vacuum pump:
Voltage: AC 220V 50Hz
Power: 370W
Pumping rate: 48L/min
Ultimate pressure: 6.7×10-2Pa
Speed: 1400r/min
Air inlet diameter: Ø8
Oil consumption: 1L
Noise: ≤68
Steel pipe: 60*40*3mm
Mobile casters: 100*50mm
Panel cabinet: 1.5mm cold plate stamping forming;
Four:. Basic configuration (each unit)
Serial No. Name Specification Standard Unit Quantity
1 The detection control panel (with panel cabinet) is equipped with various detection terminals as well as color circuit diagrams and hydraulic pipeline diagrams;
(950*900*4mm aluminum-plastic panel, and installed with insulating bottom plate) Set 1
2 ABS control unit assembly original vehicle set 1
3 ABS indicator original car set 1
4 diagnostic socket OBDⅡ pcs 1
5 ignition switch Shanghai Zhongyi 1
6 Brake Master Cylinder Original Vehicle Set 1
7 brake cylinder original vehicle pcs 4
8 brake discs original car 4
9 brake pads original car pcs 4
10 outer ball cage original car pcs 4
11 half shaft rod original car strip 4
12 left/right/front vehicle speed sensor original vehicle set 1
13 left/right/rear vehicle speed sensor original vehicle set 1
14 drive pimp Shanghai Zhongyi strip 2
15 Vacuum Powerful Drum Original Vehicle Set 1
16 brake pedal original car set 1
17 Main oil channel pressure gauge 0-250kg/psi 2 pieces
18 Brake wheel cylinder pressure gauge 0-100kg/psi 4
19 Frequency Converter Shanghai Zhongyi Taiwan 1
20 Three-phase asynchronous motor Shanghai Zhongyi Taiwan 1
21 Vacuum booster pump Shanghai Zhongyi Set 1
22 Fault setting and assessment system Shanghai Zhongyi Set 1
23 Mobile stand (with self-locking caster device) 1500×1000×1700mm (length×width×height) table 1
24 Supporting equipment instruction manual including electronic file set 1
25 Original Repair Manual Original Vehicle Set 1
151.High Bride system accessories demonstration
ZC-XTPJ01A
【Product profile】
This equipment uses the Toyota Corolla hybrid system (including engine, generator and motor, etc.) assembly for cross-section processing. The components are complete and the cross-section position is reasonable. It can fully display the internal and external structure and components of the hybrid system. Movement conditions, and the MCU control system can be used to simulate the operating status of the hybrid system under six working conditions: startup, low-speed driving, normal driving, full-speed driving, deceleration driving and parking, so as to more intuitively grasp Toyota How the Prius hybrid system works. It is suitable for teaching the principles and mechanical mechanism of hybrid electric vehicle power system.
【Functional characteristics】
1. Use the original hybrid hybrid system (including: engine, generator, motor, etc.) to perform structural cutouts to fully demonstrate the internal and external structures of the hybrid vehicle power system.
2. Spray the mechanical sections of the hybrid system with different colors of paint.
3. The three-phase gear reduction induction motor drives the engine crankshaft and motor drive shaft to operate at low speeds under various working conditions, truly demonstrating the movement process of the internal mechanical components of the hybrid hybrid system.
4. The mobile platform is made of high-strength steel structure welded, and the surface is spray-coated. The bottom of the mobile stand is equipped with a self-locking caster device, which is removable and convenient for teaching.
【Technical specifications】
1. Overall dimensions: about 1400×800×1000mm (length×width×height)
2. Power supply: three-phase four-wire (three-phase five-wire 380V±10% 50Hz)
3. Three-phase gear reduction induction motor :
Rated voltage: AC 220V/380V 50Hz
Rated power: 120W
Rated speed: 50Hz 90/1400rpm 60Hz 90/1500rpm
Reduction ratio: 30
4. Operating temperature: -40℃～+50℃
【Basic configuration (for each unit)】
Toyota Corolla Hybrid system (including: engine, generator and electric motor, etc.) assembly, three-phase gear reduction induction motor, three-phase leakage protection switch, mobile platform (with self-locking caster device)
